Stihl FS 40 Notice D'emploi page 18

English
Opening the Cap
N Swing the grip to the upright
position.
N Rotate the cap about 1/4 turn
counterclockwise.
N Remove the cap.
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends you use the STIHL filler
nozzle (special accessory).
16
All manuals and user guides at all-guides.com
Closing the Cap
N With the grip upright, insert the cap
in the fuel tank opening so that the
marks line up.
N
Rotate the cap clockwise as far as
stop (about 1/4 turn).
N Fold the grip down so that it is flush
with the top of the cap.
If the grip does not lie completely flat on
the cap and the grip's lug does not
engage the recess (see arrow), the cap
is not properly closed. You must repeat
the above steps.
Changing the Fuel Pickup Body
Change the fuel pickup body every year:
N Open the tank cap and drain the fuel
tank.
N Use a hook to pull the fuel pickup
body out of the tank and take it off
the hose.
Do not kink the fuel hose – do not
use any sharp or pointed tools.
N
Push the new pickup body into the
hose.
N
Place the pickup body in the tank.
N Fill up with fuel and close the tank
cap.
FS 40, FS 40 C, FS 50, FS 50 C