Yakima Sprocket Rocket Manuel D'instructions page 5

LOCK QUICK
RELEASE LEVER.
If you have purchased a lock,
follow lock core instructions to
install the lock.
SECURE REAR WHEEL.
Pull strap through
wheel spokes.
Do not let strap push
against valve stem.
CHECK TIRE FOR TIGHT FIT.
• If not tight, loosen strap.
• Adjust position of strap and strap
base until strap rests against rim.
• TIGHTEN strap again.
TO REPOSITION WHEN
LOCKED AND/OR LOADED:
• Lift red lever, loosen hex key.
• Reposition SprocketRocket.
• Tighten hex key, close red lever.
1033352G-5/21
All manuals and user guides at all-guides.com
ATTACH WHEELSTRAP.
• Insert one end of
strap into slot on far
side of Wheeltray.
• Leave other end free.
TIGHTEN strap by
repeatedly lifting
buckle.
DO NOT OVERTIGHTEN STRAP!
Keep strap centered
on small wheels.
The red lever is spring-loaded and can pinch your fingers when
opening. Use both hands as pictured to avoid a potential pinch.
Insert strap end behind buckle.
TO RELEASE STRAP:
Lift tab, lift up on strap.
CAUTION