Sagem D50H Livret Utilisateur page 53

All manuals and user guides at all-guides.com
Livre D50H EN.book Page 21 Vendredi, 12. septembre 2003 4:34 16
A
PPENDIX
A
PPENDIX
Care and Maintenance
Use a slightly damp cloth to wipe the base and handset, do not use a dry cloth as this may
cause electrostatic charges.
Problems
Refer to the table presented below in case of an operational malfunction:
Problems Remedies
The base indicator light is not lit Make sure that :
•
•
The handset display is blank Make sure the batteries are properly installed.
Place the handset on the base and fully charge the batteries.
To increase the life of your batteries, you can perform this operation about every
two months.
If these precautionary measures do not resolve this issue, replacement
batteries are available through your reseller.
As time goes by, you may notice a slight decrease in battery performance. Use
your handset until the battery is fully discharged, and then charge it for at least
12 hours.
The handset does not ring Make sure that the telephone is properly connected and that you have a dial
during an incoming call tone.
Make sure your telephone is not set to silent mode.
Make sure you are not in the privileged access mode.
No radio link between the Make sure the handset is registered by moving closer to the base, if it is
handset and base registered correctly, the handset screen should display its own handset number.
The network indicator icon Otherwise, register the handset to the base. See "Register your other hand set
flashes on a base", page 18.
You obtain a "busy" dial tone for Make sure no one else is using another handset (if the intrusion mode is
each dialed number deactivated).
Make sure that the dial mode (tone or pulse dialing) is compatible with your
telephone line or your automatic branch exchange.
Make sure your time limit has not run out (if activated).
Make sure you are not on call restriction (if activated)
You cannot send or receive Make sure you have subscribed to a caller display service.
SMSs Find out if the SMS service is in fact activated on your line.
Obtain the server numbers from your service provider and make sure they are
identical to the numbers on your handset.
Have you provided your contacts with the right terminal number?
the power adapter is properly connected to a power socket.
your fuse and circuit-breaker are in working order and that the power
socket is powered.
21