REMOTE CONTROL
If there is more than one file on the device you are playing, and you press
Press the ► button to pause playing the file temporarily.
Press the ► button again to play the selected file.
Select the STANDARD mode if you want to enjoy the original sound. When
you choose a Sound Effect mode (except STANDARD), Surround Sound
Press the #,$ button to increase or decrease the subwoofer volume.
You can also activate SPK ADD function of the soundbar by pressing and
holding WOOFER button of the remote for over 5 seconds.
Press the Surr.Sound button on the remote to add depth and
When you select SURROUND SOUND AUTO: If the sound source has
more than 2 channels, SURROUND SOUND ON turns on automatically.
If the sound source has 2 channels (stereo) or less, SURROUND SOUND
You can also activate WPS function by pressing and holding
Surr.Sound button on the remote for over 5 seconds.
+ Installing the Batteries in the Remote Control
1. Use a suitable coin to turn
the remote control's battery
cover counterclockwise to
remove it as shown in the
figure above.
All manuals and user guides at all-guides.com
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
the # button, the previous file is selected.
SOUND EFFECT
Press to select a sound effect mode.
Expansion will automatically be turned OFF.
You can control the woofer volume.
You can set it from SW -6 to SW +6.
Surr.Sound (Surround Sound Expansion)
spaciousness to the sound.
OFF is selected automatically.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when
inserting the battery. Put the battery
cover on and align the ' ' marks side
by side as shown in the figure above.
10
POWER
VOLUME
Skip Back
Play/Pause
WOOFER
3. Use a suitable coin to turn the
remote control battery cover
clockwise as far as it will go to
fix it in place.