Publicité
Les langues disponibles
Les langues disponibles
fi nish framing - after appliance installation
13.0 Dynamic Heat Control™ installation checklist
EN
SINGLE-SIDED
WARNING
!
•
Ensure knockout plates on the fi xed side are not removed or damaged (single-sided only).
Front frame installed
2 knockout plates removed
(Access side only)
2 cover plates removed
(Access side only)
2 defl ectors installed
(Access side only)
2 knockout plates undamaged
(Fixed side only)
High limit switch installed (Ac-
cess side only)
Wire harness connected to
high limit switch and control
board.
Install Safety Barrier
Frame the appliance
Clean all dust and debris
Finish the appliance
Installation of Dynamic
Heat Control™ recorded in
owner's manual.
SEE-THRU
Front & rear frame installed
4 knockout plates removed
4 cover plates removed
4 defl ectors installed
High limit switch installed
(Access side only)
Wire harness connected
to high limit switch and
control board.
Install Safety Barrier
Frame the appliance
Clean all dust and debris
Finish the appliance
Installation of Dynamic
Heat Control™ recorded
in owner's manual.
28
W415-2373 / B / 04.30.21
access side
defl ectors
Knockout Plates
fi xed side
top view
defl ectors
defl ectors
top view
front frame
access
side
side view
front frame
access side
side view
defl ectors
rear frame
defl ectors
fi xed side
Publicité
