Publicité
Les langues disponibles
Les langues disponibles
fi nish framing - after appliance installation
11.0 minimum combustible mantel clearances
EN
WARNING
!
•
Risk of fi re. Maintain all specifi ed air space clearances to combustibles. Failure to comply with these
instructions may cause a fi re or cause the appliance to overheat. Ensure all clearances (i.e. back, side, top,
vent, mantel, front, etc.) are clearly maintained.
•
When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
•
Installing a television or other electronics above the appliance may cause discolouration, melting, or damage
to the electronics. Use clearances as guidelines and refer to your TV manufacturer's instructions for further
information.
MANTEL DEPTH
MANTEL HEIGHT
2" (5.1cm)
A
25 11/16" (65.2cm)
Optional hearth
extension
Electronics, picture frames, decors, or other wall-
mounted objects must be 6" below the air outlet
opening and 6" above the fi nishing fl ange.
26
W415-2373 / B / 04.30.21
12" (30.5cm)
Top of
finishing
flange
Bottom of
fi nishing fl ange
2" (5.1cm)
Bottom of the
appliance
Installing a mantel between this appliance and
electronics or other materials that may be sensitive
to heat, will reduce the effect of direct heat on them.
Follow mantel height and depth instructions for proper
clearance information. A non-combustible mantel is
considered a non-combustible protrusion
Air outlet opening
Ceiling
6" min.
6" min.
Publicité
