Projecting - Sony VPD-MX10 Mode D'emploi

Projecting

I / 1
FREEZE MS SLIDE
D KEYSTONE
INPUT APA
MENU ENTER
1
Plug the AC power cord into a wall outlet, and connect all equipment, then
open the front cover.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the I /
The ON/STANDBY indicator lights in green.
3
Turn on the equipment connected to the projector.
4
Press the INPUT key to select the input source.
To input from
Computer connected to the INPUT A connector
Computer connected to the INPUT B connector
Memory Stick inserted to the Memoty Stick slot
Video equipment connected to the VIDEO input
connector
Video equipment connected to the S VIDEO input
connector
Rear remote control
detector
LAMP/COVER TEMP/FAN
MENU
ENTER
key.
1
ON/STANDBY
indicators
POWERSAVING ON/STANDBY
POWER
INPUT
RESET APA
Press INPUT to display
INPUT A
INPUT B
MS
VIDEO
S VIDEO
21
GB
Projecting