Trix H0 Re 4/4I Mode D'emploi page 7

Important: Changes in the settings market with ( * ) for the
Selectrix mode of operation automatically lead to changes in
the DCC mode of operation and versa!
CV Discription
1 Adress
2 Minimum speed
3 Acceleration delay
4 Braking delay
* ** Maximum speed
5
8 Factory Reset
17 Extended address (upper part)
18 Extended address (lower part)
bit 0: Travel direction polarity reversal
bit 1: number of speed levels 14 or 28/128
29
bit 2: DCC Operation with braking Block.
DCC-, Selectrix- and DC power Operation
bit 5: Adress size 7 bit / 14 bit
bit 0: Motor polarity reversal
bit 1: Headlight polarity reversal
51 *
bit 2: Track polarity reversal
— ABV on/off
** Higher values do not lead to a further increase in speed.
*** The values for the desired settings must be added.
All manuals and user guides at all-guides.com
DCC Value
1 - 127
0 - 15
0 - 127
0 - 127
0 - 255
8
CV 29, bit 5 =1
CV 29, bit 5 =1
Value
0 / 1
***
0 / 2
0, 1, 2, 3, 4, 5,
0 / 4
6, 7, 32, 34, 35,
36, 37, 38, 39
0 / 32
0 / 1 ***
0 / 2 0 - 7
0 / 4
Factory SX1 Value
Setting
DCC / SX1
3 / 01 01 - 99
2 / — —
3 / 2 1 - 7
3 / 2
210 / 6 1 - 7
— / — —
255 / — —
255 / — —
6
—
0 / 4 0 - 7
— / 1 1 - 2
7