Philips Combi 3000 Mode D'emploi page 5

Important
• Read the instructions in conjunction with
the illustrations before using the
appliance.
• Do not leave the appliance operating
unattended.
• Do not allow children to operate the
appliance.
• Care must be taken when handling the
metal blade, the blender blade and the
slicing disc as these are very sharp.
• Remove the protective cap from the
metal blade before use.
• Let the rotating parts come to a complete
stop before opening the cover.
• Never put your fingers or e.g. a spatula
into the food chute or into the blender jar
while operating.
• Remove the mains plug from the wall
socket after use.
• If the mains cord of this appliance is
damaged, it must be replaced by the
special cord.
Apply to your Philips dealer or to the
Philips organization in your country.
• Prior to initial use, wash all the parts
which come into contact with food.
• Never immerse the motor housing or the
top-piece for mixing/kneading/whisking
in water or any other liquid. Do not rinse
either.
• When mixing or blending fluids, do not
fill above the maximum level indication
on the bowl or the blender jar.
• Do not exceed the maximum quantities
and processing times indicated in the
tables of pages 12-14.
• Place the lid on the bowl in the right
manner. The built-in safety lock then
becomes unlocked and the appliance can
be switched on.
• Keep these instructions for future
reference.
All manuals and user guides at all-guides.com
5
Positioning the bowl
- Move the handle in
the direction of the
arrow (2) until it stops.
Positioning the cover
3
- Move the cover firmly in the direction of the
arrow (fig. 4) until it stops and the markings on
the cover lip and on the bowl (hand grip) meet.
Built-in safety lock
Only if in the right manner (see indication marks)
- the cover has been screwed onto the bowl, and
also
- either the blender jar, top-piece for
mixing/kneading/whisking or the screw-cap
has been screwed onto on the blender jar
mounting hole, the built-in safety lock is
released so that the appliance can be switched
on.
For that reason, please give figs. 3 and 4 extra
attention!
After use
- Set the switch to
position O.
- Now you can release
the cover from the bowl
by turning the cover
anti-clockwise.
Food chute and pusher
• Use the pusher to feed
ingredients through the
food chute.
2
1
2
4
5
6