kqueo KX2+S Mode D'emploi page 37

STEP N°8 :ATTACHING THE CONTROL BOX AND THE CONTROL PANEL
TO THE TRAY
NECESSARY TOOLS
8.1 Using the 2 screws (C), attach the control box (H) to the tray.
The control box must be properly fixed and firmly set flat under the top in order
for the anti-collision to function properly
8.2 Using the 2 screws (D) , attach the control panel (J) to the tray.
8.3 If the cable connecting the control box (H) and the lifting column (N) is too
short, the connecting cable (P) can be used to increase the length.
15