Publicité
Les langues disponibles
Les langues disponibles
STEP N°7: CONNECTING THE CONTROL BOX AND THE CONTROL
PANEL
7.1 Connect the motor cables from the lifting columns (N) to the control box
(H).
7.2 Plug the control panel cable (J) into the control box (H).
7.3 Connect the power cable to the other side of the control box (H).
7.4 IMPORTANT: Do not connect to the mains supply until assembly is com-
plete, otherwise the collision detector will not be correctly calibrated.
7.5 You can use the connecting cable (P) to connect the shorter cable of the
lifting column (N) to the control box (H).
14
Publicité
