Publicité
Les langues disponibles
Les langues disponibles
NECESSARY TOOLS AND EQUIPMENT
Preparation
1. Important characte-
ristics to know
2. The tools you need
3. What to expect be-
fore installation
4. What to check be-
fore installation
Necessary material
Supply
100-240V
Allen Wrench 4
Allen Wrench 5
mm
Check all components listed in the component checklist. If any of
the components are missing or damaged, contact the vendor for
replacement.
6
Common use
Operating cycle 2mn of
Load capacity
use, then 18 mn break
<120kg
Maximum load
capacity 130kg
Phillips-head
mm
screwdriver
-A floor mat or tarpaulin that will protect the floor
and the desk during assembly.
- Allow between 40 minutes and 1 hour for installa-
tion.
Drill/
screwdriver
Publicité
