Steba BS 1800 Touch Mode D'emploi page 25

The reference temperature chan be changed by pressing the
temperature (Comfort, Eco or Frost free) will light up in sequence to show the selected reference temperature:
H : 23
Use the buttons and
the last hour of the day (23) the next press of the button
H : 23
d : 2
At this time it is possible to show/change the reference temperature for all the hours of the Day 2 or directly set the
Day 2 identical to Day 1. In the first case just use the buttons
second case just press the button
automatically goes at the beginning of Day 3. This procedure can be repeated untill Day 7 programming:
d : 2
d : 3
At the end of Day 7 programming, or in any other intermediate step by pressing the button
save step is activated. The display shows "End" and the next press of the button
modified:
End
to show/change the set temperature for each one of the hours of day 1. Once reached
once. In this way the day 2 is automatically set equal to Day 1 and the system
21
button. The led light corresponding to each different
allows to enter the programming for day 2:
as already described for the day 1; in the
and
saves the program just shown/
, the final confirm and
25