Steelcase Flex Instructions D'installation page 5

®
Pull the sock over the frame with the short zipper on the
3
curve side, close the zippers, and adjust the sock seam to
run along the outside of the frame.
Align three glide covers to the frame while capturing the sock
4
between the glide skirt and the frame by threading in the glides.
Secure glide covers with 2 #8 screws.
Sock Seam
CAUTION: Do not
overtighten.
Use a low torque
setting to prevent
screw stripping.
#2
.750"
(19.05mm)
6x
#8-15x 0.75"
Page 5 of 17
Doc # 160362 Rev B
Glide cover