Panasonic PT-51HX42C Manuel D'utilisation page 30

R G I M
OLLER UIDE CON
Other Adjustments (contd.)
r CONVERGENCE 1 - In SET UP menu select CONVERGENCE 1 under OTHER ADJ. only after moving the PTV to
adjust for the effects of the earth's magnetic field on the projection tubes. Only use the remote control buttons
while adjusting convergence. The front control panel navigation and Action buttons have no effect.
Note: Convergence seldom needs adjusting except after moving the PTV.
r Use the navigation buttons on the remote control to align the horizontal and vertical green lines on screen with the
outside reference marks on screen frame, as shown below.
SET UP
IDIOMA/
LANGUE
AUTO POWER ON
PROG CHAN CHAN BANNER
CONVERGENCE 1
CC
CONVERGENCE 2
OTHER ADJ.
r Use the navigation buttons on the remote control to align the red cross with the white cross pattern at the center
of the screen.
CONVERGENCE
NEXT : ACTION
Note: To prevent picture tube damage do not leave test pattern on for an extended period of time.
28 l
All manuals and user guides at all-guides.com
O
ENU PERATION
r Press VOL u to display next menu.
SET
K
ON
K
K
ACTION
r
Press
RED
menu.
r
Then repeat procedure for adjusting blue.
An adjusted cross pattern appears white with a
minimum of color fringing.
screen frame
r
Press
to display BLUE convergence
r
Press
normal picture.
Convergence Adjustment
CONVERGENCE
GREEN
Reference Marks
ACTION
to display RED convergence menu.
ACTION
to store adjustments and to display
NEXT : ACTION
CONVERGENCE
BLUE
NEXT : ACTION