Publicité
Les langues disponibles
Les langues disponibles
EN
OPERATING USING THE APP
Recommended distance: less than 4 meters
Make sure your vacuum robot, router, and your mobile phone are close together so that you can pair your phone
with the vacuum robot with no problems.
Before you can control your device through an application, you must press and hold the ON/OFF button
on the vacuum cleaner for at least 3 seconds until the Wi-Fi icon flashes
Download and installation of the app
1.
Scan the QR code below (Fig. 1) or find and download the Weback application on Google Play or App Store
(Fig. 2)
2.
If you already have a Weback ID, open the application, log in and click ADD DEVICE (Fig. 5)
3.
If you are a new user, start by registering your Weback ID (Fig. 4). Enter your country, your mobile number,
and choose a password. Then click „Get". You will receive a verification code via SMS. By entering and
confirming the verification code you will complete the registration.
Fig. 1
Fig. 2
94
.
Fig. 3
Fig. 4
VR3000
Instructions for pairing the device
1.
At the beginning of pairing, you need to be connected to your Wi-Fi network.
2.
Scan the QR code below or on the bottom of the vacuum robot (Figs. 6–7).
3.
Select your Wi-Fi network to which the robot needs to connect to and enter your password. (Fig. 8)
4.
Restart the vacuum robot using the power switch on its side.
5.
Press the top button for 3–5 seconds (Fig. 9). A sound signal can be heard and the Wi-Fi icon on the robot
starts to flash.
6.
Confirm by pressing „Confirmed above" and continue.
Fig. 5
Fig. 6
7.
Your phone will automatically try to connect to the robot and it will connect it to your Wi-Fi network. (Fig. 10)
8.
Successful pairing (Fig. 11)
Fig. 10
Fig. 11
PAIRING TROUBLESHOOTING
• Verify that your Wi-Fi network password is correct.
• After restarting the robot (Fig. 9), wait at least 1 minute before giving further instructions.
• The device only supports 2.4 GHz Wi-Fi networks.
• The router is overloaded as many other devices are connected.
• When attempting to connect to the robot (Fig. 10), try to manually connect to its Wi-Fi network „ROBOT ###".
VR3000
Fig. 7
Fig. 8
Fig. 9
Fig. 12
EN
95
Publicité
