Publicité
Les langues disponibles
Les langues disponibles
Selecting a pro-
gramme
Care symbols
Drying level for
programmes with
a selectable dry-
ing level
Time-controlled
and other pro-
grammes
Warm air
3. Selecting a programme
The tumble dryer is switched on by selecting a programme and
switched off by turning the programme selector to the position.
Turn the programme selector to the required programme.
A drying level may also light up and durations will appear in the time
display.
Drying
Normal/higher temperature (see control panel: "Cottons" pro-
gramme)
Low temperature (see control panel: "Minimum iron" pro-
gramme)
Do not tumble dry
Ironing
Very hot
Hot
Hot
Do not iron
The pre-set drying level can be changed if required.
Touch the sensor control for the drying level you want. It then lights
up brightly.
The drying levels that are available for selection depend on the selec-
ted programme.
You can set the duration in one-minute increments
from minutes to hours.
Touch the or sensor control repeatedly until the required pro-
gramme running time appears in the time display.
en - Drying
97
Publicité
