Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Butler 4056/4056C
•
Press the Up or Down key
•
Enter the number (max. 5 digits) to be barred, e.g. 01486.
•
Press the Programming key
•
'HS _ _ _ _ _' (= number on the handset (1-5)) '01486' (= the barred numbers) appear on
the display.
•
Enter the numbers of the handsets from which the barred numbers cannot be called.
•
e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486
These handsets can no longer dial numbers beginning with '01486'.
•
Press the Programming key
Repeat the same procedure described above if you would like to bar other numbers
(max. 5)!
4.28 DIRECT CALL
By setting a Direct Call number, the phone will automatically take the line and dial out this
number. This function is useful to use the phone as a emergency phone.
4.28.1 To program the Direct Call number
•
Press the Programming key
•
Press the Up or Down key
•
Press the Programming key
•
If necessary, delete the existing number by pressing the Delete-key a few times
•
Enter the direct number
•
Press the Programming key
4.28.2 Turn the Direct Call function ON/OFF
To turn it ON:
•
Press the Programming key
•
Press the Up or Down key
•
Press the mute-key
•
'DIRECT ON' appears on the display
To turn if OFF:
-
Quick press the Programming key
4.29 DEFAULT SETTINGS (RESET) OF THE PARAMETERS
You can reset the standard (default) settings in the telephone. You need the PIN code to do
this.
The default settings are:
Keypad:
Key clicks:
Speaker volume:
Ringer melody:
Ringer volume :
Selection base unit:
Flash time:
To restore the default settings, do the following:
Butler 4056/4056C
to select one of the 5 memories.
.
to confirm your selection.
until 'DIRECT' appears on the display
until 'DIRECT' appears on the display
for 2s
twice
not locked
active
level
1
5
automatic
100ms
21
Publicité
Table des Matières
