Kasanova E-MOOTIKA Manuel D'instruction page 59

E-MOOTIKA
3.4. Installation of steering handle
3.4.1 Installation of Mountain bike steering handle
1- Take out the Across handle Stems, remove the protective paper
above the Across handle Stems, and spin off four fixed screws on
the Vertical handle stems;
2- Remove the top cover of the Vertical handle stems, fix the Across
handle Stems to the Vertical handle stems, and adjust the angle of
the Across handle Stems;
3- Tighten the top cover of the Vertical handle stems with the bolt
by 6N.m torque to ensure that the up and down gap of the top
o cover of the stand pipe is even.
All manuals and user guides at all-guides.com
INSTRUCTION MANUAL
1- Across handle Stems
2- Top cover of Vertical handle
stems
3- Top cover bolt of Vertical handle
stems
4- 4mm hexagon spanner
ENG
59