Kasanova E-MOOTIKA Manuel D'instruction page 56

All manuals and user guides at all-guides.com
E-MOOTIKA
56
3.2. Installation of Front wheel
3.2.1. Installation of common front wheel
1- Take out the front wheel, and loosen the nut and hook on the
front wheel axis;
2- Remove the black plastic rack below the Front fork, and place
the front wheel axis into the Front fork contact pin;
3- Turn the hook and nut (* front fender stick) to the front wheel
axis, and tighten the nut with 15mm opening wrench by 18N.m
torque and install the protective cap on the nut.
1- Hook
2- Front wheel axis nut M10mm
3- Front fork foot contact pin
4- Front fender stick
- When fastening the front wheel nut axis, press down the Front fork
by force so that the front wheel axis can work closely with the Front
fork.
* Note: some models of front fender sticks need to be installed on the
front wheel axis.
INSTRUCTION MANUAL
ENG
3.2.2
1 Ta
laps
2 Re
V b
the
3 Ro
ck r
4 Ex
V b
5 Pi
bra
re-d
deb