Kasanova E-MOOTIKA Manuel D'instruction page 58

All manuals and user guides at all-guides.com
E-MOOTIKA
58
3.3. Installation of front brake
3.3.1 Installation of front Disc brake
1- Take out the Disc brake, and spin off the two bolts in front of the
disk brake;
2- Take visual inspection of the distance between the two brake
blocks of the Disc brake should be 3 to 4mm;
3- Put the Disc brake plate into between the two brake blocks, and
fix the Disc brake on the fixed hanger of the Disc brake of the
Front fork with two inner hexangular M6 × 16mm bolts by 8 to
10N.m torque;
4- After the bolts are tightened, rotate the front wheel, and listen to
whether there is any abnormal sound; if there is, need adjust the
Disc brake (Please refer to Chapter 4.6 for the specific debugging
method).
1- Disc brake plate
2- Disc brake
3- Inner hexangular M6×16mm bolt
4- Brake block
5- Fixed hanger of the Disc brake
Note: when fixing the Disc brake bolt, drag the lower part of the Disc brake
with hand, and push the Disc brake upward as far as possible
INSTRUCTION MANUAL
ENG
3.4.
3.4.
1- Ta
abo
the
2- R
han
the
3- T
by 6
cov