SilverCrest SMW 900 EDS B4 Mode D'emploi page 65

Programming the cooking time
After you have selected the power level, programme in the desired cooking time:
Turn the control dial r
■
The increments for setting the time with the control dial r
–
from 0 sec to 5 min: in 10-second increments
–
from 5 to 10 min: in 30-second increments
–
from 10 to 30 min: in 1-minute increments
–
from 30 to 95 min: in 5-minute increments
Aborting/stopping an input process
Press the stop button e
reverts to standby mode.
Starting the cooking process
When you have set the power and cooking time, you can start the cooking pro-
cess: To start the cooking process, press the start/quick start button r
microwave symbol
down. When the set time has elapsed, "End" and "Hot" will appear alternately in
the display 1. You will hear a series of beeps.
Quick start function 1
In standby mode, turn the control dial r
cooking time. Start cooking at 900 W by pressing the start/quick start button r
Quick start function 2
With this function, you can start cooking immediately for 30 seconds (or longer,
up to 95 minutes) at 900 W.
Press the start/quick start button r
■
and "00:30" appear on the display 1. The microwave starts the cooking
process for 30 seconds. The time starts counting down.
If you wish to cook for longer than 30 seconds, press the start/quick start
button r
The time increments are set as follows:
–
from 30 sec to 5 min: in 30-second increments
–
from 5 to 95 min: in 1-minute increments
│ GB │ IE
■ 62
, until the desired cooking time has been set.
once to cancel and end the input. The appliance
appears on the display 1. The programmed time counts
repeatedly until the desired time is reached.
are as follows:
to the right and set the required
once. The microwave symbol
SMW 900 EDS B4
. The
.