Publicité
Les langues disponibles
Les langues disponibles
TOP HINGE WINDSHIELD
KIT PN 2878268
UPPER WINDSHIELD ASSEMBLY
1. Position and fasten the assembly handle (#25) onto
the lower part of the upper windshield (#1) using the
handle bracket (#22),
(2) M5-0.8 X 20 mm
machine screws (#9), and
The Polaris logo should be on the top side of the
handle when oriented as shown below.
2. Position and fasten the pivot support (#21) onto the
lower part of the upper windshield (#1) using
Allen socket machine screws (#9) and
M5-0.8 X 20 mm
nylock nuts (#17).
(2) M5-0.8
3. Insert the end of the gas spring (#24) into the open
intended of the pivot support (#21) and fasten with a
flange nylock nut (#16).
M8-1.25
Repeat steps 2 and 3 for the opposite side.
3510036
A-3510036 Rev. A
Allen socket
nylock nuts (#17).
(2) M5-0.8
(2)
LEFT SIDE VIEW
4. Position and fasten the assembly pivot support (#21)
onto the upper part of the upper windshield (#1) using
Allen socket machine screws (#9)
(2) M5-0.8 X 20 mm
and
nylock nuts (#17) (finger tighten at this
(2) M5-0.8
time).
Repeat step for the opposite side.
UPPER WINDSHIELD
INSTALLATION
1. Align the upper windshield assembly (#1) with the
lower windshield (#2) as illustrated.
- 5 -
LEFT SIDE VIEW
Publicité
