Télécharger Imprimer la page

Black & Decker LSWV36 Mode D'emploi page 9

Publicité

Les langues disponibles

Les langues disponibles

OperaTION
ALwAYS wEAR SAFEtY gLASSES. wEAR A FiLtER MASk iF
tHE OpERAtiOn iS DUStY. USE OF RUBBER gLOVES AnD
SUBStAntiAL FOOtwEAR iS RECOMMEnDED wHEn wORking
OUtDOORS. FOR HOUSEHOLD USE OnLY.
wARning: CUt HAzARD. When turning the tool off for tube
installation or any other reason, wait 10 seconds for the fan to
stop rotating before disassembly.
• Do not use in vacuum mode without the vacuum tubes and
collection bag in place.
• Always switch off and remove the battery when:
• Changing from blower to vacuum.
• The power supply cord has become damaged or entangled.
• You leave blower/vac unattended.
• Clearing a blockage.
• Checking, adjusting, cleaning or working on blower/vac.
Use blower/vac only in daylight or good artificial light.
SwitCHing On AnD OFF (FigURE i)
warNING:
USe BOTH HaNdS TO GrIp THe prOdUcT
fIrMLy wHeN SwITcHING ON.
To switch the sweeper on, slide the on/off
switch forward.
To switch the sweeper off, slide the on/off
switch back.
caUTION:
DO NOT POINT UNIT
DISCHARGE AT SELF OR BYSTANDERS.
All manuals and user guides at all-guides.com
I
9
pOwer cOMMaNd (FigURE J)
MaX pOwer / MaX rUNTIMe
The max power / max runtime feature
(j1) is located on the tool handle.
It allows you to optimize the tools
performance and boost the power as
needed.
• To choose max power, rotate dial
to setting 6. (most vacuuming tasks
require max power.)
• To maximize runtime rotate dial to setting 1.
• For a combination of both, rotate dial to setting from 2 to 5.
Sweeper OperaTION
caUTION:
Always wear safety
glasses. Wear a filter mask if the
operation is dusty. Use of gloves, long
pants and substantial footwear is
recommended. Keep long hair and loose
clothing away from openings and moving
parts. THIS SWEEPER IS FOR
HOUSEHOLD USE ONLY.
NOTe: Ensure the sweeper is switched
off and the battery is removed before
attaching or removing the sweeper tubes.
The sweeper tube must be assembled
to the housing before use. Install battery
after assembly just prior to use.
• Hold the sweeper with one hand as
shown in figure k and sweep from side to side with the nozzle
several inches above the hard surface. Slowly advance keeping
the accumulated pile of debris in front of you.
j
j1
k

Publicité

loading