Mark GSE Serie Livret Technique page 9

C/D One or two maximum thermostats order code 31 01 935
The maximum thermostat switches the burner off once it reaches its set point. The fans remain in
operation. The burner resumes operation on cooling down to below the set point (dual action).
Either one or two thermostats will be installed depending on the type of appliance (see above and
the settings table [9]).
5.4 Air pressure switch order code 06 07 604 [10]
The pneumatic (air pressure) differential switch controls the flow of flue gasses. If little or no flow
of flue gasses is detected, supply to the gas regulator combination is interrupted. Set point: set by
the manufacturer.
D Settings disc
E Underpressure connection
F Overpressure connection
5.5 Flue gas fan [11]
For G(N)SE: Depends on the type of appliance. [11]
For G(N)CE: Depends on the customer's planned requirements. Consult your dealer.
5.6 Fan [12]
For G(N)SE: Depends on the type of appliance. [12]
For G(N)CE: Depends on the customer's planned requirements. Consult your dealer.
All manuals and user guides at all-guides.com
EN
9