Stanley STHT1-77366 Manuel Utilisateur page 6

GB
User Manual
Installing Your Smart Measure Pro App
1. The Smart Measure Pro app is available for
download from the App Store or Google Play.
2. On your device, launch the App Store or Google
Play.
3. Within the search box, search for Stanley
Smart Measure Pro.
4. Follow the instructions to download and install
the app on your device.
5. Once installed, the Smart Measure Pro app icon
will appear on your device's screen.
6. Proceed to Pairing Your Smart Measure Pro to get
started.
Pairing Your Smart Measure Pro
NOTE:
The LED indicator shows the status of your Smart
Measure Pro:
Blue fl ashing: Smart Measure Pro
discoverable over Bluetooth
Blue on: Smart Measure Pro connected to
device
6
All manuals and user guides at all-guides.com
1. Turn on Bluetooth on your device.
2. On your Smart Measure Pro, press the Power
3. On your device, tap on the Smart Measure Pro
4. Tap the NO DEVICE CONNECTED button.
5. When your Smart Measure Pro unit appears, tap
Centering the Smart Measure Pro Laser
Before using your Smart Measure Pro, you need to
ensure that the laser is aligned with the camera on
your device. The Smart Measure Pro app contains
a detailed instruction tutorial on this procedure under
SETTINGS: Align Laser.
1. In the Smart Measure Pro app, tap on SETTINGS,
Green fl ashing: Smart Measure Pro charging
Green on: Smart Measure Pro fully
charged
Off: Power off
button.
• The LED indicator fl ashes blue indicating that
the Smart Measure Pro is discoverable over
Bluetooth.
• If the LED indicator remains off, Smart
Measure Pro may need charging.
app to launch it. The main menu should appear
after the app starts.
The app will display any nearby Smart Measure
Pro units available for pairing.
If no unit appears, ensure that the Smart
Measure Pro unit's LED indicator is fl ashing blue
(see Step 2).
on it to pair it with your device.
This step is necessary the fi rst time you use Smart
Measure Pro. For subsequent uses, your Smart
Measure Pro will automatically be paired with
your device.
Settings Laser Calibration
6'9"
9'1"
X: 0 Y: -15
X: 5
Done
Y: 0
then tap Align Laser.
Y: -15
9'1"
X: 0