Inserting Batteries Into The Remote; Step 1: Speaker System Hookup; Required Cords - Sony DAV-C900 Mode D'emploi

Inserting Batteries into the Remote

You can control the system using the supplied remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries to the markings inside the compartment. When
using the remote, point it at the remote sensor
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.

Step 1: Speaker System Hookup

Connect the supplied speaker system using the supplied speaker cords by matching the colors
of the terminals to those of the cords. Do not connect any speakers other than those supplied
with this system.
To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.)
on page 25.

Required cords

Speaker cords
The connector and the color tube of the speaker cords are the same color as the label of the
terminals to be connected.
US
18
(+)
(–)
Color tube
on the system.
Grey
(+)
(–)
Black