Siemens Bewator BM3 Manuel D'installation Et Utilisation page 9

All manuals and user guides at all-guides.com
BM3 Installation & User Manual
Installing Bewacom
Install the Bewacom at a height of 120–140 cm
(from the floor to the bottom edge of the Bewa-
com). To cater for disabled persons, a suitable
height is approximately 95 cm.
1� Open the Bewacom with the key supplied.
The lock is located on the front.
2� Fasten the back plate against the wall, us-
ing three screws as shown in the illustration
below. Seal the screw and cable holes with
sealant if the unit is externally mounted.
9