Siemens Bewator BM3 Manuel D'installation Et Utilisation page 22

All manuals and user guides at all-guides.com
22
Possibility to call the Bewacom
Using this function, the Bewacom can be called
from the switchboard or from an extension to
assist a visitor having trouble using the door
telephone.
To enable the function:
1� Set Bewacom to programming mode.
2� Press A66.
3� Select and programme the desired 4-digit
code. The code is keyed in at the telephone
to open the door.
4� Enter the code one more time.
5� Press B to leave programming mode.
To deactivate the function, follow the above
instruction, only press 0000 instead in steps 3
and 4.
On page 27 you will find instructions on how to
call the Bewacom.
"Hotline"
By using the facilities of the telephone system,
this function can be used to call a particular
extension from a single push of the B button
on the Bewacom. When this function is set, the
Bewacom will seize the line immediately the B
BM3 Installation & User Manual