Siemens Bewator BM3 Manuel D'installation Et Utilisation page 23

All manuals and user guides at all-guides.com
BM3 Installation & User Manual
button is pressed. No other number is permit-
ted at this point (the keyboard is disabled).
The telephone system is then programmed to
respond to this "hotline" condition.
To enable this function.
1� Set Bewacom to programming mode.
2� Press A67.
3� Press 1 to enable hotline.
4� Press B to leave programming mode.
To deactivate the function, press 0 in step 3
instead.
Change number of digits in the extension
In some cases the PABX requires more than four
digits in the extension number. You can select
how many by doing as below:
1� Set Bewacom to programming mode.
2� Press A92
3� Enter the number of digits with two digits
(01-99)
4� Press B to leave programming mode.
23