Siemens Bewator BM3 Manuel D'installation Et Utilisation page 21

All manuals and user guides at all-guides.com
BM3 Installation & User Manual
Background lighting
This function allows you to turn off the keypad
background lighting of the Bewacom. The de-
fault setting is on.
1� Set Bewacom to programming mode.
2� Press A60.
3� Press 0 to shut off background lighting.
4� Press B to leave programming mode.
To turn it on again, press 1 in step 3 instead.
Internal sounder
When Bewacom is delivered the internal sound-
er is on. If the sounder is not required to sound
on keypresses and door release, you can turn it
off. Note that the sounder will still be sounding
during programming.
1� Set Bewacom to programming mode.
2� Press A65.
3� Press 0 to shut off the sounder.
4� Press B to leave programming mode.
To reactivate the sounder, press 1 in step 3
instead.
21