Siemens Bewator BM3 Manuel D'installation Et Utilisation page 19

All manuals and user guides at all-guides.com
BM3 Installation & User Manual
3� Press 1 to extend opening time 10 times.
4� Press B to leave programming mode.
To deactivate the function, press 0 in step 3
instead.
Changing the calling time
When Bewacom is delivered the calling time is
set to 30 seconds.
1� Set Bewacom to programming mode.
2� Press A29.
3� Select the desired calling time in seconds
(01-99).
4� Press B to exit programming.
Extending the calling time 10 times
Using this function the calling time can be in-
creased by a factor of ten.
1� Set Bewacom to programming mode.
2� Press A61.
3� Press 1 to extend the calling time 10 times.
4� Press B to leave programming mode.
To deactivate the function, press 0 in step 3
instead.
19