Parts Supplied; List Of Materials; Parts Not Supplied - Elica ECV630S3 Guide D'utilisation, D'entretien Et D'installation

LIST OF MATERIALS

Removing the packaging.
I CAUTION
Remove carton carefully, wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly and
LED lamps already installed
5x45 mm
4.5x13 mm
4x8 mm
Tools/Materials required
• Level
• Drill with 1 ⁄ " (3.0 cm), ⁄ " (3.0 mm),
1 1
4 8
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Saber or keyhole saw
• Metal snips
• Screwdrivers:
- Phillips
- Flat-blade
Pieces
1
4
6
4
Parts no supplied
Optional accessories and consumable parts
⁄ " (4.8 mm) drill bits
1
1 6
Supplied Part
Rectangular duct 3 ⁄ " x 10" (8.3 x 25.4 cm)
1
4
with back draft dampers
Torx 20 adapter
10x50 mm wall anchors
KIT
30" (76 cm)
Duct Cover
KIT02159
Extension Kit 6"
Duct Cover
KIT02160
Extension Kit 12"
Stainless Back
Splash and Warm
KIT02162
Racks Kit
Pieces
1
1
4
# Part
36" (91.54 cm)
KIT02158
KIT02161
KIT02163
5