Electrolux IK1695Z Notice D'utilisation page 63

TECHNICAL DATA
Dimension of the recess
Rising Time
Voltage
Frequency
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.
INSTALLATION
Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility
if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
All manuals and user guides at all-guides.com
Height
Width
Depth
1225 mm
560 mm
550 mm
12 h
230-240 V
50 Hz
Ventilation requirements
The airflow behind the appliance must be
sufficient.
min.
200 cm
Installation of the Taste Guard Filter
The Taste Guard Filter is an active carbon
filter which absorbs bad odours and per-
mits to maintain the best flavour and aroma
for all foodstuffs without risk of odour cross
contamination.
On delivery the carbon filter is in a plastic
bag to maintain it's duration and character-
istics. The filter should be placed behind the
flap before the appliance is turned on.
1. Pull the flap outwards (1)
2. Remove the filter from the plastic bag
3. Insert the filter in the slot found in the
back of the flap cover (2)
4. Close the flap cover
electrolux 63
2
min.
200 cm
2