Optika Italy B-150V Serie Manuel D'instructions page 10

8. Assembling
8.1 Assembling the microscope with observation head
1. Remove the dust cap from the microscope frame and from
the bottom of the observation head.
2. Insert the optical head above the stand and tighten the screw
①. (Fig. 1)
• Hold the head with one hand during the locking in order
to avoid that the head falls.
3. Insert the eyepiece into the empty tube of the optical head.
(Fig. 2)
4. Insert the microscope power supply jack in the socket placed
at the rear side of the microscope. (Fig. 3)
8.2 Assembling the microscope with digital head
1. Remove the dust cap from the microscope frame and from
the bottom of the digital head.
2. Insert the digital head above the stand and tighten the screw
①. (Fig. 4)
• Hold the head with one hand during the locking in order
to avoid that the head falls.
Page 10
①
F ig. 1 F ig. 1
F ig. 2 F ig. 2
F ig. 3 F ig. 3
①
F ig. 4 F ig. 4