Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
Open the right side cover, and then attach the
discharge attachment.
Insert the hooks of the discharge attachment under the
rod of the right side cover.
2
► 1. Right side cover 2. Discharge attachment
FUNCTIONAL
DESCRIPTION
Installing or removing portable
power pack
CAUTION:
Always switch off the machine
before installing or removing the portable power
pack.
CAUTION:
Hold the machine and the portable
power pack firmly when installing or removing
portable power pack. Failure to hold them firmly
may cause them to slip off your hands and result in
damage to the machine and portable power pack and
a personal injury.
CAUTION:
Make sure that the portable power
pack is securely installed to the machine. If not,
it may accidentally fall out of the machine, causing
injury to you or someone around you.
CAUTION:
Before operation, make sure that
the cord is securely attached to the cord holders
and the socket is inserted into the plug all the
way.
For PDC1200
1.
Place the cord of the portable power pack as
shown in the figure.
1
► 1. Portable power pack 2. Cord
2.
Install the portable power pack to the machine as
shown in the figure.
► 1. Battery support lever 2. Portable power pack
3. Lock button
CAUTION:
pack is securely locked to the battery support
levers and the lock button is securely locked.
9 ENGLISH
1
2
Make sure that the portable power
1
2
3
Publicité
Table des Matières
