Publicité
Les langues disponibles
Les langues disponibles
Chime On/Off Button
c
• To activate or deactivate the button sounds, press and hold Cycles and Machine Clean
simultaneously for three seconds. The error alert sound cannot be turned off.
Cancel Button
d
• The drain pump activates and the cycle cancels. Once the dishwasher finishes draining, the power
turns off.
• Press and hold Start for three seconds to activate.
Start Button
e
• To operate the machine, either press Start and close the door within four seconds or close the door
and press Start.
• An alert will sound when the door is not closed within 4 seconds after you press Start button.
Wash Cycles
Select your desired cycle.
Selecting the Cycle
The default cycle is Auto. You can also customize
these settings using the Cycles button.
• Press the Cycles button repeatedly to select the
Normal, Heavy, or Turbo cycle.
Auto
This cycle senses the soil amount and soil
toughness and is optimized to achieve the best
cleaning.
Normal
This cycle is for daily, regular, or typical use to
completely wash a full load of normally soiled
dishes. The energy usage label is based on this
cycle without any options. Select the Night Dry
option if leaving dishes overnight. Press and hold
Extra Dry for three seconds to activate Night Dry.
• After the cycle ends, the fan runs for an hour to
help vent the warm, moist air in the tub. You can
stop the fan by opening the door after the cycle
ends.
Heavy
This cycle is for heavily soiled dishes and dishes
with hardened on soil. This cycle defaults to the
strongest spray intensity and uses it to wash
heavily soiled dishes.
Turbo
This cycle will clean heavily soiled dishes in an hour
using slightly more energy and water.
• This cycle does not have drying. Select the Extra
Dry and Night Dry option or another cycle for
better drying.
Machine Clean
This cycle is for cleaning the inside of the
dishwasher. Use the cycle without dishes in the
machine. It eliminates residual soils, odor, white
spots, and other dirt. Add citric acid or another
cleaning agent for more effective results.
Options and Extra Functions
Select the desired cycle and then select the options
for that cycle.
Using the Flexible Zone
This option adjusts the wash intensity to target
different zones inside the dishwasher. Set it to
wash just the upper rack or lower rack, or set the
intensity to soft for the upper spray arm and
strong for the lower spray arm.
The Flex Zone is off by default. Press the Flex
Zone button to customize settings.
• Press the Flex Zone button repeatedly to select
the 4 modes for cleaning the dishes.
Mode
Small loads & light soil
• Use just the upper rack to save
energy and time.
Small loads & heavy soil
• Use just the lower rack to save
energy and time.
Small loads & heavy soil & light/sensitive
dishes
• Focus on lower rack, but also
operate lightly to wash some light
or sensitive dishes in the upper
rack.
OPERATION
Description
25
Publicité
