Filling quantities
- Split billet: max. length: 25-33 cm, 1-2 billets per filling, max. 1.6 kg (≈ 2.0 kg/h)
- Wooden briquette DIN 51731: max. 1.2 kg
Adjustment of the burning air:
Model
SOSA
one-hand air slide
GOR
Never close the one-hand air slide control completely during operation (never push the
lever all the way to the right). This should only happen after the flame has gone out com-
pletely.
IT IS NOT ALLOWED to burn waste, fine chipping, bark, wood handled with preventive
chemicals, furthermore paper and cardboard. For kindling, please use wood scrapings
or grill starter but never use liquid auxiliaries!
The first kindling
•
At the first fire set-up could be a little smoke, but is not dangerous, normal!
In this time, please ventilate the room carefully!
Warning! Upon the first kindling, smoke and unpleasant smell may be generated.
Always ensure the proper ventilation of the room (by opening windows and
doors), and heat the fireplace at maximum rated heating performance. If with the
first heating the maximum temperature is not reached, the above-mentioned ef-
fects may as well arise later on.
Open the door with the tool. Adjust the primary air regulator to the Table 1. Put coal
lighter or wood wool into the fire grate, followed by wood chips. First insert small pieces
of wood, and then larger ones, light them and close the door again. When the wood
burns quickly, and leaves sufficient glowing embers, put additional fuel on the fire.
Thereafter, adjust the primary air regulator according to the Table 1 („Adjustment of the
burning air"). The first kindling should be performed "finely" with little fuel only, so that
the parts of the fireplace be adapted to heat. During the first kindling, the generation of
smell is normal.
Regulator
control
Nominal heating
Starting
performance
OPEN
35% (ca. 1/3)
Table 1
23
Putting out of
working
OPEN
CLOSE