Warn 85690 Instructions D'installation page 5

7. Place front plow mounting plate (1A) into position as shown
in figures 5.
8. If installing the winch mounting plate with the Warn front
plow mounting plate, place the front plow mounting plate
into the frame as shown in figure 6 and 7. Tilt the front
plow mounting plate forward and slip the winch mounting
plate rear flange behind the plow mounting plate. Both
mounting plates will then slip into place.
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
I N S T A L L A T I O N I N S T R U C T I O N S
5
Figure 4
Figure 5
Figure 6
85689A2