Warn 83130 Instructions D'installation

Your safety, and the safety of others, is very important. To help you make informed decisions about
safety, we have provided installation and operating instructions and other information on labels and in
this guide. This information alerts you to potential hazards that could hurt you or others. It is not possible
to warn you about all potential hazards associated with this product, you must use your own good judg-
ment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT
DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUC-
TIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid
personal injury or death. WARNING and CAUTION are signal words that identify the level of hazard. These
signal words mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow recom-
mendations.
CAUTION signals a hazard that may cause minor to moderate injury, if you do not
follow recommendations.
This guide uses NOTICE to call attention to important mechanical information, and Note: to emphasize
general information worthy of special attention.
Failure to observe these instructions could lead to severe injury or death.
Always use extreme caution when drilling on any vehicle. Make sure that all fuel lines, brake lines, electrical

wires, and other objects are not punctured or damaged when / if drilling on the vehicle. Thoroughly inspect
the area to be drilled (on both sides of material) prior to drilling, and relocate any objects that may be dam-
aged. Failure to inspect the area to be drilled may result in vehicle damage, electrical shock, fire or personal
injury.
Always wear safety glasses when installing this kit. A drilling operation will cause flying metal chips. Flying

chips can cause eye injury.
Always use extreme caution when cutting and trimming during fitting.

Always remove jewelry and wear eye protection.

Never lean over battery while making connections.

Never route electrical cables:

Across any sharp edges.
Through or near moving parts.
Near parts that become hot.
Always insulate and protect all exposed wiring and electrical terminals.

Always install terminal boots as directed in installation instructions.

Always use appropriate and adequate care in lifting components into place.

Always insure components will remain secure during installation and operation.

Always tighten all nuts and bolts securely, per the installation and operation.

Always perform regular inspections and maintenance on the winch, winch mount and related hardware.

Never operate this WARN product with damaged or missing parts.

INSTALLATION INSTRUCTIONS
WINCH MOUNTING KIT
Part Number: 83130
Application: 2009 Suzuki King Quad 400
WARNING
INJURY HAZARD
PAGE 1 83132A0