o� After the door handle is installed, the door reversing operation is
finished�
GB
• For installation of the door handle, please refer to the above
Item�
Double check that the door is aligned correctly and all the
seals are closed on all sides� If necessary, re-adjust the levelling
feet�
NOTE: If you want to have the door swing reversed, we
recommend that your contact a qualified technician� You should
only try to reverse the door yourself if you believe that you are
qualified to do so�
All parts removed must be saved to do the reinstallation of the
door� You should rest the fridge freezer on something solid so
that it will not slip during the door change process� Do not lay the
fridge freezer flat as this may damage the coolant system� Ensure
the fridge freezer is unplugged and empty� We recommend that 2
people handle the fridge freezer during assembly�
69
Maintenance
Noise from your appliance
You may notice some rather unusual noises� The noises are caused
by circulation of refrigerant in the cooling system� It has become
more pronounced since the introduction of CFC free gases� This is
not a fault and will not affect the performance of your fridge�
Prolonged off periods
If the appliance is not in use for a long period of time, proceed as
follows:
1� Disconnect from the mains supply�
2� Clean and dry the inside (see 'Cleaning and maintenance')�
3� Leave the door open to prevent any unpleasant smells from
building up while the appliance is not in use�
Notes for use
• Do clean and defrost your appliance regularly�
• Do check contents of the compartments every so often�
• Do store commercially prepared food in accordance with the
instructions given on the packets�
• Do choose high quality fresh food and be sure it is thoroughly
clean before freezing it�
• Do wrap all food in food quality polythene bags or air tight
containers and make sure any air is excluded�
• Do Not store poisonous or any dangerous substances in your
freezer� It is designed for the freezing of edible foodstuffs only�
GB
70