Publicité
Les langues disponibles
Les langues disponibles
2� Enabling the Quick Cooling function
• In the fridge mode, press the Function key to select Quick
Cooling until the corresponding icon gets flickering, and
then press the OK/Lock key within 5s for confirmation� If
the OK/Lock key is not pressed within 5s, the setting will be
invalidated�
3� Exiting the Quick Cooling function
• Under the Quick Cooling mode, press the Function key to select
Quick Cooling until the corresponding icon gets flickering, and
then press the OK/Lock key for confirmation, the Quick Cooling
function will get exited�
GB
1.5 Child Lock
1� When the Child Lock function is enabled, the temperature and
function are subjected to no change to prevent maloperation�
2� In case of no key operation within 3 minutes, the Child Lock
function will be enabled automatically�
3� Enabling/exiting the Child Lock function manually
• Press and hold down the OK/Lock for 3s, then the Child Lock
function can be enabled/ disabled�
1.6 Door open alarm
If any door is open for more than 3 minutes, buzzer alarms will
be continuously issued, which can be stopped when any key is
pressed, but will be restored after 3 minutes if the door keeps
open� The alarms will not be lifted until the door is closed�
1.7 Power-cut memory
In case of power failure, the refrigerator will maintain the
operating state before power failure when power supply is
57
restored�
1.8 Power-on delay
In order to protect the refrigerator compressor from being
damaged in the case of short-time power failure (i�e�, less than 5
minutes), the compressor will not be started immediately after it
is powered on�
1.9 Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if it is set in the
freezer mode and the compartment temperature is higher than
-10
, digits of temperature get flickering on the display� The
°C
temperature at which the system is energized can be displayed
when any key is pressed, and the normal display will be restored
when any key is pressed again or after 5s�
1.10 Fault alarm
In case E0, E1, E2, EH, or EC is displayed on the operation panel, it
indicates fault with the refrigerator� Please contact the aftersales
person for visiting service in such case�
Instructions for food storage
Precautions for use
• The appliance might not operate consistently (there is
possibility of defrosting or temperature becoming too warm
in the frozen food compartment) when sited for an extended
period of time below the cold limit of the temperature range
for which the refrigerating appliance is designed
• The information of climate type of the appliance is provided on
the rating plate�
GB
58
Publicité
