Saba UF3820NFW Mode D'emploi page 37

d� Remove the three bolts from the hinge cover on the left-side
top of the refrigerator, remove the hinge cover, take out the wire
harness in the hole, and install the door shaft sleeve�
GB
e� Lift the refrigerator door up by 50mm to remove the refrigerator
door�
f� Remove the front leveling feet, use the tool to remove the 4
screws to fix the hinge, and then remove the hinge�
65
g� Take the lower left hinge out of the accessory bag, and install it
on the refrigerator with the tools�
h� Remove the door stopper and door closer from the door, take out
the door closer from the accessory bag, and install it on the left
side of the door�
i� Install the door onto the door cabinet�
GB
66