Blomberg MIS 3200 X Consignes D'utilisation page 13

3.1 ON/OFF switching of cooking zone
By pressing the ON/OFF key for 1 sec (key no. 1) the Touch Control changes
from OFF mode into standby mode emitting a short buzzing signal as well as
a visible „0" on the cooking zone display. Instead of „0" the cooking zone
display can also show an „H" meaning „hot cooking surface" or, alternatively,
an „E" meaning "error". If no key is touched within the 10 sec after activating
the standby mode, the Touch Control unit changes back into OFF mode.
While activated or in standby mode the electronics may be reset, at any time,
into OFF mode by simply touching the ON/OFF key. During operation, the
OFF function always has priority , i. e. even if several keys are touched
simultaneously, the control unit would switch off. The Touch Control unit can
still be switched off, even though the Key-Lock function (see 2.10) had been
activated.
ON/OFF switching of a cooking zone
ON switching
A cooking zone can be directly activated via the corresponding plus / minus
keys while in standby or active mode, unless the cooking zone had not been
set by the optional timer programming (see 2.13).
Starting position: Cooking zone is in OFF mode. Display: „0": If starting
out with the „+" key, the cooking stage display moves from „0" up to „5". If
starting out with the „-" key, the cooking stage display moves from „0" up
to „9" (i. e. the highest configurated cooking stage available).
While pressing the „+" or „-" key, the cooking stage is increased /
reduced automatically. The time difference occurring during changing
from one stage to another is about 0.5 sec. The buzzer only emits an
audible signal at the first change of cooking stages. Once the highest or
lowest stage is reached, the cooking stage remains there (limit stop).
Only releasing the key and touching again results in skipping this limit
stop. („0" Å „9" or „9" Å „A"). Even if no automatic heat-up function or
booster function is available for the relevant cooking zone, changing from
9 to 0 is not possible.
OFF switching
A cooking zone can be switched off in the following way:
by pressing the „+" and the „-" keys of the desired cooking zone
simultaneously
by selecting cooking zone „0" for the desired cooking zone by pressing
the „-" key.
All manuals and user guides at all-guides.com
3.FUNCTIONS
9