Installation; Charger Overall Dimensions; Wiring - Cristec YPOWER Série Manuel D'utilisation

CONNECTIONS :
AC input terminal: WAGO type
WINSTA reference 770-813
3

INSTALLATION

This paragraph deals with installation of the equipment.
Installation and initial commissioning should be carried out by an electrician or professional installer in accordance
with the standards currently in force (for pleasure boats the applicable international standard is ISO13297).
The installer should familiarize himself with this operating manual and inform users of the instructions for use and the
safety warnings set out in the manual.
Fixing of the charger is made by 4 x M5 round head screws.
Center distance: see corresponding drawing in appendix 3 et 4.
3.1 C
HARGER OVERALL DIMENSIONS
Shore power unit UEYPO/12-16 and UEYPO/12-25: refer to appendix 3
Shore power unit UEYPO/12-40: refer to appendix 4
3.2 W
IRING
When connecting or disconnecting a cable, the charger's power supply must be turned off and the batteries
electrically insulated from the charger.
The references for additional cables and connectors required for the appliance to operate efficiently are provided in
the following paragraphs: failure to comply with these provisions renders the warranty null and void.
Terminal for temperature probe
STP-NEW-2.8 or STP-NEW-5.0
(option)
DC output terminal:
PHOENIX CONTACT PC 16/4-GF-10, 16 BK
29