Corsair HX750W Manuel D'utilisation page 9

Step B: Replacing your existing power supply
1 Disconnect the AC power cord to your wall outlet or UPS from the existing
power supply.
2 Disconnect all the power cables from your video card(s), motherboard and all
other hard disk drives, SSDs and peripheral devices.
3 Follow the directions in your chassis manual and uninstall your existing
power supply.
4 Go to Step A.
Safety and Agency Approvals
CE EN55022:1998/A1:2000/A2:2003 CLASS B EN 61000-3-2:2000,
EN 61000-3-3:1995/A1:2001 EN55024:1998/A1:2001/A2:2003
FCC FCC Part 15 & Part 2 (CISPR 22 CLASS B)
C-TICK AS/NZS CISPR 22:2002 CLASS B
UL UL 60950-1
CSA CSA C22.2 NO. 60950-1
TUV EN 60950-1
CB IEC 60950-1
Warnings
• Due to the high voltages inside the power supply, under no circumstances should the power
supply cover be removed. The warranty will be void if the cover is removed.
• Please operate the power supply in a safe and dry environment.
• Do not insert any objects into the open ventilation or fan grill area of the power supply.
• Please use ONLY genuine Corsair modular cables with Corsair 750W/850W PROFESSIONAL
Power Supply. Third party cables might not be compatible and could cause serious damage
to your system and power supply. The use of third-party cables will void the warranty.
• The 24-pin ATX power connector has a detachable 4-pin section. This
4-pin section is not a P4 / ATX12V connector. Please DO NOT force this cable in the
P4 / ATX12V socket on the motherboard.
• For indoor use only.
8