Yakima SwingDaddy 4 Instructions D'installation page 4

locK bIKes to carrIer.
• Access lock cable from
recess at rear of mast.
accessIng rear when bIKes are loaded
loosen wIng bolt
completely.
lift spring pin...
stabilize loaded
arm by inserting
pin into hole.
15
1033439J-4/
pull gate away from vehicle,
while rotating mast...
close the
gate.
Replace the pin.
• Pass cable through bike frame.
• Attach lock to pin.
• Lock the lock.
YOU MUST USE THE LOCKING CABLE
WHEN CARRYING BIKES.
remove pIn.
drIvIng away
• çlose gate and tighten
large wing bolt.
You should
• Perform Safety Checks
hear a click
(next step).
as mast
snaps into
place.
you should hear
a click as mast
snaps into place.
"click"
before