Publicité
Les langues disponibles
Les langues disponibles
Function parameters for EJ
* Item:
A
Always enter 0.
B
Always enter 0.
C
Temporary EJ printing during transaction
D
EJ printing and clearing EJ data when
issuing general Z1 report
E
PGM mode operation records type
F
REG/MGR/VOID modes operation
records type
G
Compressing printing for EJ data
H
Action when EJ memory area is full
On the default setting, an asterisk is marked.
Temporary EJ printing during transaction
• If selecting "yes", you can print journal data of a current transaction recorded in EJ memory by pressing the
R
key during the transaction. To realize this function completely, the cash register is programmed to
receipt printing and set Receipt ON/OFF function to OFF.
PGM mode operation records type
• For data of program reading operation, the header information only is printed.
For X/Z reports, the header information only is printed.
(Receipt sample for Header Information only)
Action when EJ memory area is full
• By default, when the memory for EJ becomes nearly full, the cash register shows decimal points at the 8th
and 9th positions of the display (EJ memory nearly full message), and the cash register keeps storing new
data while erasing the oldest data. When "0" is selected, the cash register will not show EJ memory nearly
full message. When "2" is selected, the cash register shows EJ memory nearly full message and when the
memory gets full, the cash register locks the sales/data entry with a display of the memory full message
"
". You can only issue an EJ report.
Key operation example
00100002
46
s
68
s
@
68
s A
To set "00000000"
@
*ABCDEFGH
Selection:
(Fixed position)
(Fixed position)
Disallow
Allow*
No*
Yes
Details*
Header information only
Details*
Total
No (normal size)
Yes (small size)*
Continue
Warning (near full warning)*
Lock (with near full warning)
s
Entry:
0
0
0
1
0
1
0
1
0
1
0
1
0
1
2
Print
A
Publicité
