Settings; Method - Goobay 71367 Mode D'emploi

User manual
2. Install the product either on the ceiling, wall or behind prefabricated
walls.
Fig. 10: Mounting
3. Set the adjustments like shown in chapter 7.
7

Settings

7.1

Method

19
Detection range
• Set a the detection range between 10/50/75/100 %.
This is 2-15 m for wall mounting and 2-8 m for ceiling mounting.
Switch-off delay (optional)
• Set a switch-off delay from 5 seconds to 30 minutes.
Within the selected period, the load remains on with 100%
brightness.
Daylight sensor
• Set the daylight sensor 2-2000 Lux.
The 2 Lux setting switches the motion sensor on during day
and night, only by night with 2000 Lux setting.
The motion sensor settings overrides the Daylight Sensor.
This means, after the triggering by motion detection, the
motion detector switches only after the set switch-off delay
in the daylight setting.
Dimming phase length (optional)
• Set the dimming phase length.
The dimming phase length determines the length of the
dimming phase after the already set switch-off delay for
100 % light.
0 s
+ ∞
Dimming level
• Set a the dimming level between 10-50 %
This determines the brightness of the light during dimming
phase.
means no dimming = off.
means permanently dimmed = no off.