Videotec MAXIMUS MPX 2 Serie Manuel D'instructions page 40

15.2 MAXIMUS MPXR SERIES2
(MPXR)
15.2.1 General
AISI 316L stainless steel construction
External surfaces micro-shot peened and electro-
polished
Dynamic positioning control system
Radiometric analysis:
• on the 4 central pixels, if the thermal camera has
radiometric functions
• definition of a specific area, if the thermal camera
has advanced radiometric functions
Radiometric alarm activation: If the temperature
is over the threshold set, under the threshold set,
between two thresholds set or outside the two
thresholds set.
Actions on alarm: Activation of digital output, preset
tour recall, home position recall, preset position recall
and http get request.
15.2.2 Mechanical
Cable inputs: 2 x 3/4" NPT
Zero backlash
Horizontal rotation: 360°, continuous rotation
Vertical rotation: from -90° up to +90°
Horizontal speed (variable): from 0.1°/s to 100°/s
Tilt speed (variable): from 0.1°/s to 100°/s
Accuracy of preset positions: 0.02°
Unit weight: 26.5kg (58lb)
15.2.3 Housing's window
Germanium window
• Thick: 8mm (0.3in)
• External treatment: antiscratch (Hard Carbon
Coating - DLC), antireflection
• Internal treatment: antireflection
• Spectral range: from 7.5μm up to 14μm
• Medium transmittance (from 7.5μm up to
11.5μm): 87.5%
• Medium transmittance (from 11.5μm up to 14μm):
72.1%
38
15.2.4 Electrical
Supply voltage/Current consumption:
• 230Vac ±10%, 0.5A, 50/60Hz
• 24Vac ±10%, 5A, 50/60Hz
• 120Vac ±10%, 1A, 50/60Hz
• 220Vac ±10%, 0.54A, 50/60Hz
• 100Vac ±10%, 1.2A, 50/60Hz
Power consumption:
• 120W max
15.2.5 Network
RJ45 port
• Ethernet connection: 10BASE-T/100BASE-T
Slot SFP (SMALL FORM FACTOR PLUGGABLE)
• Ethernet connection:100BASE-FX
• Supply voltage: 3.3V
• Standard: compliant MSA
The SFP module (not supplied by VIDEOTEC) must
meet the following requirements:
• Laser: Class 1, complies with EN60825-1
• Certification: UL/IEC 60950-1 or UL/IEC 62368-1
15.2.6 I/O interface
Input for remote reset: 1
Alarm inputs: 1
Relay outputs: 1 (1A, 30Vac/60Vdc max)
MNVCMPXHDC_2038_EN